Help Guides
Applying You Glue onto a Rubber Sheet
1. Place your rubber on a slab of glass
2. Apply your glue onto the rubber (making sure there is enough on there)
3. Using a brush spread the glue all over the rubber so that it is covering the entire flat surface
4. Flatten the rubber and place a second slab of glass over the top, Then leave the rubber in-between the glass for 10-20minutes
5. Remove your the top slab of glass and make sure the glue has gone tacky Your rubber is now ready to be applied to the blade
One of the things that most annoy me in Table Tennis is how the Balls crack or collapse in on themselves, however there is a way to fix this problem and make your ping pong ball as good as new
1. Fill a Pan up just over half way with water
2. Place the pan on your ovens hob
3. Wait until the water is boiled or hot
4. Place your crumbled Table Tennis Ball in the water
5. Using a spoon roll the Table Tennis Ball around in the pan
6. Remove the Table Tennis Ball our of the pan and place on a plate to dry
Click On The Image To Enlarge The Picture
Click On The Image To Enlarge The Picture